Adjusting The Harness And Clearing Saw; Standard Harness; Triobalance Harness - Husqvarna 343F Manuel D'utilisation

Adjusting the harness and clearing
saw
WARNING! When using a clearing saw it
!
must always be hooked securely to the
harness. Otherwise you will be unable to
control the clearing saw safely and this can
result in injury to yourself or others. Never
use a harness with a defective quick
release.

Standard harness

Safety release
At the front is an easily accessible, quick release. Use this if
the engine catches fire or in any other emergency situation
that requires you to free yourself from the machine and
harness.
Spreading the load on your shoulders
A well-adjusted harness and machine makes work much
easier. Adjust the harness for the best working position.
Tension the side straps so that the weight is evenly
distributed across both shoulders.
Correct height
1 Forestry clearing
The machine should be supported in a harness when
forestry clearing so that the cutting equipment is angled
slightly forwards in relation to the ground. Adjust the
54 – English
ASSEMBLY
height using the strap on the harness for the support
hook.
2 Grass clearing
The machine should be supported in a harness when
grass clearing so that the cutting equipment is parallel to
the ground.

Triobalance harness

Safety release
Push down the red release lever to release the machine from
the harness.
Adjusting the harness
1 Tighten the hip strap so that it sits securely.