Technical Data - IKRA BRM 1040 Manuel D'utilisation

5. TECHNICAL DATA

Lawn Mower
Drive type
Engine type
Rated engine power
Rated engine speed
Displacement
Height adjustment
Cutting heights
Catcher TYPE
Catcher volume
Cutting width
Enclousure
Carton dimensions
Net weight
Sound pressure level (ISO 5395-1:2013)
Schallleistungspegel
Vibration (ISO 5395-1:2013)
Emissions
• The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
• The specified vibration emission value can also be necessary for the assessment of work breaks are used.
• The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
• Note: You create the privilege against vascular pulsations of the hands in time breaks
Keep the development of noise and vibration to a minimum!
• Only use properly functioning machines.
• Maintain and clean the machine regularly.
• Adapt your working method to the machine.
• Do not overstress the machine.
• If necessary, have the machine inspected.
• Switch the machine off when it is not in use.
• Wear work gloves.
Wear hearing protection. The influence of noise can cause hearing loss.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
GB | Operating Instruction
BRM 1040
Hand push
4-storke Motor (Ducar1P56F)
kW 1,6
rpm 2.850
cm³ 98
7 Heights(central)
mm 25-75
Rear Bag Collection (Rear Bag Collection with plastic
cover)
L 45
cm
ca. 40 cm (16 Zoll)
Steel iron deck
665 x 485 x 370
kg
21
dB (A) 83
dB (A) 96
2
m/s 7,78 [K1,5 m/s
9
[K2,5 dB(A)]
2
]