Technical Specifications; Lawn Mower - IKRA IBRM 1040 TL Manuel D'utilisation

Technical Specifications

Lawn Mower

Drive type
Engine type
Rated engine power
Rated engine speed
Displacement
Height adjustment
Cutting heights
Grass bag capacity
Cutting width
Enclousure
Volumes of fuel tank
Volumes of lubricating oil tank
Weight
Sound pressure level L
pA (EN ISO 5395-2:2013)
Measured sound power level, L
Vibration, a
hw (EN ISO 5395-2:2013)
Emissions
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks
Keep the development of noise and vibration to a minimum!
• Only use properly functioning machines.
• Maintain and clean the machine regularly.
• Adapt your working method to the machine.
• Do not overstress the machine.
• If necessary, have the machine inspected.
• Switch the machine off when it is not in use.
• Wear work gloves.
Wear hearing protection. The influence of noise can cause hearing loss.
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require
noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the local regulations when operating your device.
GB | Operating Instructions
kW
rpm
cm 3
mm
L
mm
L
L
kg
dB (A)
dB (A)
WA (2000/14/EC)
m/s 2
IBRM 1040 TL
Hand push
SL1P56F, 4 stroke, forced air cooling
1,2
2900
99
7 Heights
20-70
50
400
Steel
1,0
0,4
21,5
79,5
[K=3,0 dB(A)]
91,8
[K=1,91 dB(A)]
5,52 2
[K=1,5 m/s ]
11