Technical Specifications - IKRA GBS 8050 LI Mode D'emploi

Accu- Grass- und Shrub shear
Dear customer,
We have created this instruction manual for you in order to ensure the reliable operation of your clippers. By following
the instructions, your machine will always work to your satisfaction and we can guarantee its long lifetime.
Our machines were tested under extremely severe conditions prior to production. They were also subjected to
continuous testing during production. This series of tests guarantees the consumer a high quality product.
Design and performance are subject to change, without prior notice, due to improvements.

Technical Specifications

Model
Battery voltage/operation voltage
Battery type
Charging current
Charging time
Operating time
Cutting movements
Cutting width *
Cutting length **
Cutting thickness **
Noise pressure level as per (DIN EN 60745-2-15)
Vibrations (DIN EN 60745-2-15)
The machines comply with the safety class III.
Technical changes are reserved.
* Grass trimmer ** Shrub trimmer
- The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
- The specified vibration emission value can also be necessary for the assessment of work breaks are used.
- The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of the hands in time breaks.
- Try to keep the stress due to vibration as low as possible. For example, measures to reduce vibration stress are
wearing gloves when using the tool and limiting the work time. All phase of the operating cycle must be considered
in this regard, (for example, times when the power tool is switched off, and times when the power tool is switched
on but is not running under load).
- Always keep hands and feet away from the cutting tools, particularly when switching on the motor!
GB | Operating Instruction
1
GBS 8050 LI
V/DC 3,6
lithium-ion 1,5 Ah; 5,4 Wh
mA 400
h approx. 6 hours
min. approx. 40
min 1000 * / 2000 **
-1
mm 70
mm 160
mm 8
dB (A) 73
K=3,0 dB (A)
m/s < 2,5
2
K=1,5 m/s
Translation of the original Operating Instructions
2