Bosch PFS 65 Notice Originale page 21

Operation
Preparing for Operation
Spraying on the sides of water bodies
(lakes, rivers, etc.) or neighbouring surfac-
es in the direct catchment area is not per-
mitted.
When purchasing paint, varnish and spray mate-
rial, pay attention to their environmental com-
patibility.
Preparing the Spray Surface
Note: Cover off the vicinity of the spray surface
thoroughly and generously.
The spray mist contaminates the environment.
When spraying in enclosures, surfaces not cov-
ered can become contaminated.
The spray surface must be clean, dry and
grease-free.
– Roughen smooth surfaces and then remove
the sanding dust.
Diluting Spray Material
When diluting, pay attention that the spray
material and the diluting agent correspond.
When using a faulty diluting agent, lumps can
develop that can lead to clogging of the spray
gun.
Spray material
Wood preservatives,
strippers, oils, finishes
Disinfectants,
plant protectants
Solvent- or water-dilutable
paints, primers,
automobile spray paint,
thick-coat finishes
Bosch Power Tools
Recommended
dilution
undiluted
undiluted
At least
10 % diluted
For spray material that needs to be diluted, pro-
ceed as follows:
– Take the measuring cup 21.
– Stir the spray material thoroughly.
– Fill a sufficient quantity of spray material into
the spray-material container 8. (see "Filling
in Spray Material", page 21)
– Dilute the spray material by 10 % with paint
thinner. Examples:
Amount of spray
material [ml]
Paint thinner [ml]
– Stir the spray material thoroughly.
– Carry out a test-spray run on a test surface.
(see "Spraying", page 22)
When the spraying pattern is perfect, start the
spray job.
or
When the spraying result is not satisfactory or
when no paint comes out, please continue as
described under "Correction of Malfunctions"
on page 24.
Filling in Spray Material (see figures C1 – C2)
Before any work on the machine itself, pull
the mains plug.
– Unscrew the container 8 from the spray gun.
– Turn the suction tube 10 so that the spray
material can be sprayed with almost no resi-
due:
For spray jobs on
horizontal
surfaces/objects
For spray jobs
overhead
– Fill the spray material into the container and
screw the container firmly to the spray gun.
English | 21
200 300 400 500
20 30 40
toward the front in
nozzle direction
toward the rear in
handle direction
1 609 929 R18 | (31.1.08)
50