Electrolux IK3026SL Notice D'utilisation page 70

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

70
www.electrolux.com
Problem
The appliance is noisy.
Audible or visual alarm is
on.
A
symbol or
is shown instead of num-
bers on the Temperature
Display.
The lamp does not work.
The lamp does not work.
The compressor operates
continually.
There is too much frost and
ice.
Possible cause
There is no voltage in the
mains socket.
The appliance is not sup-
ported properly.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
The temperature in the
appliance is too high.
The door is left open.
The temperature in the
appliance is too high.
Temperature sensor prob-
symbol
lem.
The lamp is in stand-by.
The lamp is defective.
Temperature is set incor-
rectly.
Many food products were
put in at the same time.
The room temperature is
too high.
Food products placed in
the appliance were too
warm.
The ActionFreeze is
switched on.
The Shopping is switched
on.
The door is not closed
correctly or the gasket is
deformed/dirty.
Solution
Connect a different electrical
appliance to the mains sock-
et. Contact a qualified electri-
cian.
Check if the appliance stands
stable.
Refer to "Door open alarm"or
"High temperature alarm".
Refer to "Door open alarm"or
"High temperature alarm".
Close the door.
Contact a qualified electrician
or contact the nearest Au-
thorised Service Centre.
Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
Close and open the door.
Contact the nearest Author-
ised Service Centre.
Refer to "Operation".
Wait some hours and then
check the temperature again.
Refer to climate class chart
on the rating plate.
Allow food products to cool
to room temperature before
storing.
Refer to "ActionFreeze func-
tion".
Refer to "Shopping function".
Refer to "Closing the door".

Publicité

Table des Matières
loading

Table des Matières