Ryobi RY48140 Manuel D'utilisation page 18

Tondeuse électrique à braquage zéro
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING THE MOWER
See Figures 11 - 12.
WARNING:
Clear the area of bystanders before operating the mower.
If anyone enters the mowing area, stop immediately and
do not return to mowing until the bystanders leave the
area.
Before starting the mower:
 Ensure work area is clear of children, bystanders, and
pets.
 Clear the work area of objects that may be thrown by the
mower blades.
 Check brake operation.
 Check tire pressure.
 Check for loose fasteners.
 Check to make sure all guards are in place and working
properly.
 Clean debris from mower.
 Test safety interlock system.
 Adjust seat to desired position.
 Verify battery charge level.
NOTICE:
When the level of battery charge reaches the red zone on
the battery charge indicator, the blades will automatically
shut off. Return immediately to recharge. Continuing to
mow when the battery charge level is in the red zone
can cause the mower to become stranded away from
the charging area.
NOTE: If the mower becomes stranded away from the
charger, it will be necessary to place the drive levers
in neutral and push the mower back to the charging
location.
Mowing:
 Raise the mower deck to its highest position.
 Make sure the drive levers are in the open position.
 Insert start key and turn to ON position.
 Release the parking brake.
 Move drive levers to neutral position, then drive to desired
mowing location.
 Stop the mower, turn key to OFF position, and set the
parking brake.
 Lower the cutting deck to desired position.
 Turn start key to ON position and release parking brake.
 Raise blade engage knob to activate blades and mow as
desired.
OPERATION
18 — English
ZERO TURN
LEFT
ZERO TURN
RIGHT
FORWARD MOWING
Fig. 10
Fig. 11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ry48141

Table des Matières