Ryobi RY48140 Manuel D'utilisation page 12

Tondeuse électrique à braquage zéro
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

KNOW YOUR LAWN MOWER
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ARM RESTS
Two arm rests provide support for your arms and added
comfort while you are mowing.
AUTO STOP PLUG
The auto stop plug can be used to maintain your preferred
deck height cutting position or as a deck lift lockout when
removing the cutting deck. See the Maintenance section for
more information on removing the cutting deck.
BATTERY LEVEL INDICATOR/HOUR METER
The battery level indicator shows the amount of battery
charge remaining. The hour meter tracks the total number
of hours the mower has been used (key in on position) for
maintenance purposes.
BLADE ENGAGE KNOB
Pull the blade engage knob up to activate the mower's cut-
ting blades. Push the knob down to stop the cutting blades.
BRAKE PEDAL
The brake pedal is used for stopping the mower in an emer-
gency situation or when parking.
CHARGER
The mower's charger has a key hole hanging feature for
convenient, space saving storage. When hanging by the
keyhole slots, use at least one additional screw in the hole
in the mounting flange to secure in place. Always mount
in such a way that the charger's LED status light is visible
while charging.
DRIVE LEVERS
The drive levers are used to direct the mower, and for start-
ing and stopping during normal operation.
DECK HEIGHT ADJUSTMENT LEVER
The deck height adjustment lever is used to raise or lower
the cutting deck. Set the auto stop plug at your normally
desired cutting height for ease of use when mowing.
HEADLIGHT BUTTON
Turn the headlights on and off using the headlight button.
LOW SPEED CUT BUTTON
Press the low speed cut button to prolong battery run time
when the cutting load requirement is low.
FEATURES
LOW SPEED DRIVE BUTTON
Press the low speed drive button to limit the speed of the
mower when you're operating in tight spaces or on slopes.
This setting is also useful for inexperienced users when they
are first learning to operate the mower.
MEDIA STORAGE
Two storage areas offer a convenient place to store your cell
phone or MP3 player.
PARKING BRAKE
Use the parking brake to lock the mower in the braked
position.
POWER SWITCH WITH START KEY
The power switch is used to turn the mower on and off. The
start key must be inserted before the switch can be oper-
ated. When the key is in the accessory position, the power
switch is also used to power optional manufacturer-approved
mower accessories.
SEAT ADJUSTMENT LEVER
Use the seat adjustment lever to move the seat to the desired
position.
USB PORT
The USB charging port provides charging power of 5 Volts
DC at up to 2 amps for your cell phone, MP3 player, or other
USB devices. Consult the owner's manual for your device
for specific charging requirements.
Connect one end of a USB cable (not provided) to your
device and the other end to the USB charging port on the
mower, to begin charging your device.
NOTICE:
Attempting to charge devices rated more than 2 amps
could damage the USB charging port and/or the mower.
Always close the USB cover when not in use to prevent
debris from becoming trapped in port.
NOTE: The USB port is only powered when the start key is
in the ON position.
WARNING:
Never use headphones or any electronic device, such
as a smart phone or tablet, while operating the mower.
Distracted operation can result in an accident that could
result in death or serious personal injury to the operator
or a bystander.
12 — English

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ry48141

Table des Matières