Milwaukee M18 Manuel De L'utilisateur page 36

Exercise caution when removing
the Right Handle Half (34), not
shown. The 4mm Steel Ball
(1) may be dislodged from
the Switch Shuttle (65) by
Spring (42).
Shuttle Switch
2
1
Terminal Block
Assembly
1
Armature
Commutator
Switch/PCBA Assembly
(Contains Terminal
Block Assembly)
Motor Cage
Before installing or removing Armature,
42
to prevent damage to the brush tubes
or commutator, push / move Brush
Tubes (25) flush to inside brush tube
openings of Motor Cage (35) prior to
removing the Armature from Motor
Cage (35) /
Field (22).
1
2
AS AN AID TO REASSEMBLY, TAKE
NOTICE OF WIRE ROUTING AND
POSITION IN WIRE GUIDES AND
TRAPS WHILE DISMANTLING TOOL.
BE CAREFUL AND AVOID PINCHING
WIRES BETWEEN HANDLE HALVES
WHEN ASSEMBLING.
Brush Tube
Field
= WIRE TRAPS
or GUIDES