Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING!!
Stacking should be performed by quali-
fied installation personnel only. The ap-
pliances are heavy. Take care to use prop-
er tools and techniques when lifting and
stacking appliances.
1. Remove the drip pan from the top appliance.
2. Attach the legs or casters to the bottom ap-
pliance. See page 6.
3. Place the BC14 on the CNV14. Be sure all four
sides are flush.
4. Bolt the two appliances together using the
bolts provided.
5. GAS APPLIANCES ONLY: Attach the flue
vents as shown.
NOTE: For electric appliances proceed to
step 6.
6. Replace the drip pan.
7. Connect the gas (if applicable) and electrical.
Refer to pages 10---13.
NOTE: An optional gas manifold may be purchased
from Blodgett Combi. Order part number
R9570.
NOTE: An optional Drain Assembly/Steam Vent may
be purchased from Blodgett Combi. Order
part number R9251 for single or top ovens.
Order part number R9252 for bottom ovens.
Optional
Drain Assembly/Steam Vent
Mounting
Bracket
Drip Pan
1.125" I.D. Hose
from Drip Pan Drain
BC14 on CNV14
Figure 4
7
Installation
Stacking
Hot Air Flue
Steam Generator
(BC14G &
Flue
CNV14G only)
OptionalGas
Plumbing
Manifold
(BC14G &
CNV14G only)
Rear View
Publicité
Table des Matières
