Hitachi CJ 14DL Mode D'emploi page 10

English
CAUTION
1. If liquid leaking from the battery gets into your eyes,
do not rub your eyes and wash them well with fresh
clean water such as tap water and contact a doctor
immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
SPECIFICATIONS
Cordless Jig Saw
Model
Voltage
Max. Cutting Depth
No-Load Speed
Stroke
Min. Cutting Radius
Rechargeable battery
Weight
Charger
Model
Charging voltage
Charging time
Weight
Charge time is approximate. Actual charge time may vary.
"x" Indicates that the battery pack is not compatible with that specific charger.
STANDARD ACCESSORIES
1 Blades (No. 41) ....................... 1
Refer to Table 3 for use of the blades.
CJ14DMR (2BGK) 2 Hexagon bar wrench ............. 1
3 Splinter guard ......................... 1
CJ14DL (2LRK)
CJ18DMR (2BGK) 4 Chip cover ............................... 1
5 Charger ..................................... 1
CJ18DL (2MRK)
6 Battery ...................................... 2
7 Plastic case .............................. 1
1 Blades (No. 41) ...................... 1
Refer to Table 3 for use of the blades.
CJ14DMR (BGK) 2 Hexagon bar wrench ............. 1
3 Splinter guard ......................... 1
CJ14DL (LRK)
CJ18DMR (BGK) 4 Chip cover ............................... 1
5 Charger ..................................... 1
CJ18DL (MRK)
6 Battery ...................................... 1
7 Plastic case .............................. 1
CJ14DMR (NN)
CJ14DL (NN) Without charger, battery,
CJ18DMR (NN) plastic case
CJ18DL (NN)
Standard accessories are subject to change without notice.
9
CJ14DMR
EB14B:Ni-Cd
2.0 Ah
(12 cells)
3.0 Ah
2.5 kg
2.0 Ah : Ni-Cd
3.0 Ah : Li-ion
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return it
to your supplier or vendor.
CJ14DL
14.4V
Wood 135 mm
Mild Steel 10 mm
0 – 2400min
26 mm
25 mm
x
BCL1430: Li-ion
x
(4 or 8 cells)
2.3 kg
UC18YG
7.2 – 18 V
50 min.
x
0.3 Kg
OPTIONAL ACCESSORIES ... Sold separately
(1) Various types of blades
Refer to Table 3 for use of the blades.
(2) Guide
(3) Sub base
(4) Dust collector
Optional accessories are subject to change without notice.
APPLICATIONS
Cutting various lumber and pocket cutting
Cutting mild steel plate, aluminum plate, and copper
plate
Cutting synthetic resins, such as phenol resin and vinyl
chloride
Cutting thin and soft construction materials
Cutting stainless steel plate (with No. 97 blade)
CJ18DMR CJ18DL
18V
–1
EB1820L: Ni-Cd
(15 cells)
EBM1830: Li-ion
x
(10 cells)
2.7 kg 2.4 kg
UC18YRL
7.2 – 18 V
30 min.
45 min.
0.6 Kg
x