Flash Time Duration; Automatic Answer; Reset - Topcom BUTLER 3500 Mode D'emploi

To change the dialling mode:
1. Enter the menu by pressing
2. Select setup using the up
3. Press OK
4. Select DIAL MODE using the up
5. Press OK
6. Select the dialling mode using the up
7. Press OK to validate

4.8 FLASH TIME DURATION

1. Enter the menu by pressing
2. Select SETUP using the up
3. Press OK
4. Select RECALL using the up
5. Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time (250ms)

4.9 AUTOMATIC ANSWER

When there is a incoming call and the handset in on the base, the phone automatically takes the line when lifted. This
is the default setting, but can be set OFF:
1 Enter the menu by pressing
2 Select HANDSET using the up
3 Press OK
4 Select AUTO ANSWER using the up
5 Select ON (for automatic answer) or OFF
6 Press OK

4.10 RESET

It is possible to return the phone to the original default configuration. This is the configuration which was installed when
you first received the telephone.
To return to default settings:
1. Enter the menu by pressing
2. Select SETUP using the up
3. Press OK
4. Select DEFAULT using the up
5. Press OK
6. Enter the 4 digit PIN code (default =0000). Press OK.
7. Press again OK to validate
DEFAULT PARAMETERS ARE:
Low battery beeps
Out of range warning beeps
Key click
Auto answer
Internal melody
Internal volume
External melody
External volume
Ear volume
Phonebook
Call log list
Redial list
Pin code
Dial mode
Keypad lock
Topcom Butler B3500/3501/Twin
/OK
and down keys
and down keys
and down keys
/OK
and down keys
and down keys
/OK
and down keys
and down keys
/OK
and down keys
and down keys
ON
ON
ON
ON
1
2
3
2
3
Empty
Empty
Empty
0000
DTMF
OFF
Topcom Butler B3500/3501/Twin
15