Function Overview - Honeywell HCE80 Mode D'emploi

Function overview

The underfloor heating controller
offers the following functions:
• 5 controllable temperature zones, extendable to 8
• Up to 3 thermal actuators can be connected per zone
• Normally open or normally closed
thermal actuators can be used
• Integrated pump relay
• Boiler feedback
– Analog (only HCE80/HCC80)
– Integrated relay with floating contact
42 V AC/VDC (only at HCE80R, HCC80R)
– Wireless via relay BDR91
• Underfloor heating controller can be
switched between heating and cooling
• 1 antenna (internal or external) can
be used for 3 controllers
• Rapid installation through screwless
terminals of the thermal actuators
• Intelligent controlling via fuzzy logic
• Simple diagnoses of the wireless transmission
• Operating state display via LEDs
Antenna
Pump relay
Analog output
Boiler feedback radio
Boiler feedback relay
!
The pump relay 230 V AC is not floating.
HCE80(R) / HCC80(R) Mounting and operation
HCE80
External
230 V AC internal
Available
External with BDR91
Not available
HCE80R
External
230 V AC internal
Not available
External with BDR91
42 V AC/VDC
HCC80
Internal
230 V AC internal
Available
External with BDR91
Not available
5
HCC80R
Internal
230 V AC internal
Not available
External with BDR91
42 V AC/VDC