Cabling - Honeywell HCE80 Mode D'emploi

Cabling

Permissible cable types and lengths
Thermal actuators
Outer cable diameter
Cable length
Cable cross-section
Stripping length
Terminal range of
the connectors
Power and pump connection 230 V AC
Outer cable diameter
Cable length
Cable cross-section
Stripping length
Terminal range of
the connectors
Antenna connection
Cable length
Cable cross-section
Stripping length
Terminal range of
the connectors
Heating/cooling, boiler feedback
Cable length
Cable cross-section
Stripping length
Terminal range of
the connectors
HCE80(R) / HCC80(R) Mounting and operation
min. 3.5 mm / max. 5.3 mm
max. 400 m
max. 1.0 mm²
4 mm
0.07 - 1.33 mm²; flexible wire
min. 8.0 mm / max. 11 mm
max. 100 m
max. 1.5 mm²
7 mm
0.50 - 2.50 mm²;
flexible/fixed connection
0.50 - 1.50 mm²;
flexible, with wire end ferrule
Max. 30 m
JE-LiYCY 2 x 2 x 0.5 mm²;
JE-Y(St)Y Ø 2 x 2 x 0.8 mm;
2 x 0.5 mm²
5.5 mm
0.07 - 1.54 mm²
Max. 100 m
JE-LiYCY 2 x 2 x 0.5 mm²;
JE-Y(St)Y Ø 2 x 2 x 0.8 mm;
2 x 0.5 mm²
5.5 mm
0.07 - 1.54 mm²
Connecting the power cable
DANGER! Danger to life through
electric shock!
Contacts that are
open are live.
f Ensure that the cable
is deenergized.
Select a suitable cable for the power supply
1
from the permissible cable types.
Strip the connections 7 mm (see fold-out page, Fig. 7).
2
Connect the cable to the connector
3
(see fold-out page, Fig. 4 (12)).
Plug the connector into the socket
4
(12) (see fold-out page, Fig. 4).
Secure the cable with the cable clamp.
5
Installation Disassembling
11