Beta 599DGT-AN/10 Notice D'utilisation Et Instructions page 19

ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS
MODE OF OPERATION
Track mode operation
START
Current torque value
Current torque value
((...((...
Buzzer
((((((((
Buzzer
Note:
1. If appears, that means more than 110% of torque as stated in the specifications has
been applied to this wrench.
2. When 80% of the required torque value is reached, the green LED will start blinking and an intermittent sound will be heard.
3. When 99.5% of the target torque is reached, a continuous sound will be heard, and the green LED will stop blinking and will
remain on. The red LED will also turn on.
INIZIO
(System initialization)
* Note 1
Set torque value
Applying torque
Reaching 80% of target torque
...))...)) ((...((...
80% of target torque reached
Reaching target torque
)))))))) (((((((
* Note 2
...)) ...))
Green LED
* Note 3
)))))))
Red LED
Target torque reached
EN I
19