Getting Started - Waterpik WP-250 Mode D'emploi

Masquer les pouces Voir aussi pour WP-250:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Plug the cord into an electrical outlet. If the outlet is
controlled by a wall switch, be sure it is turned on.
Preparing the Reservoir
Fill the reservoir with lukewarm water. Replace the
reservoir over the base and press down firmly.
Fill
Replace
O
I
2
1
3
Inserting and Removing Tips
Insert tip into the center of the Water Flosser handle. The
colored ring will be flush with the top of the handle if the tip
is correctly locked into place. Gently pull on tip to confirm it
is seated properly and locked in place.
To remove tip from the handle slide the tip eject button up
towards the top of the handle and lift tip from handle.
Tip Insertion
Insert
NO
Gap

GETTING STARTED

Tip Removal
Eject
Slide
Button
Up
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wp-260Wp-270Wp-300

Table des Matières