General Safety Instructions Gb - IKRA HGSI 45 Manuel D'utilisation

Attention: Noise protection!
the local regulations when operating your de-
vice
Hints for your work with the tool
The shrub trimmer cuts ornamental shrubs
and light undergrowth or bushes. The device
is also well-suited for ornamental cuts as, for
example, for the care of graves.
The battery-powered grass and shrub
shear can not and should not replace
your hedge shears.
They are exclusively designed to trim and cut
back ornamental shrubs and brush -wood
with a low wood thickness. Any other use is
not deemed appropriate and the manufactur-
er/ supplier is not liable for damages resulting
from such use.
The grass shears allow for clean cuts of lawn
edges or hardly accessible lawn areas.
Each type of use other than those given in
these instructions for use can damage the
machine and cause serious risk to the user.
Please always observe the safety instructions
in order to safeguard your guarantee claim
and in the interests of product safety. Due to
the machine's design, we are unable to fully
exclude all residual risks.
Residual dangers
Residual risks always remain even if the hedge
trimmer is used properly. The hedge trimmer's
design can entail the following hazards:
• Contact can be made with the unprotected
blade (resulting in cutting injuries)
• Reaching into or grabbing the hedge trim-
mer while it is in operation (resulting in cut-
ting injuries)
• Unanticipated, sudden movement of the
plant material being cut (resulting in cutting
injuries)
• Ejection or catapulting of damaged cutting
teeth
• Ejection or catapulting of the plant material
being cut
• Hearing damage if the specified hearing
protection is not worn
GB | Operating Instruction
• Inhalation of cut materials
Please observe
General safety instructions
Attention! Read all instructions contained here-
in. Failure to observe the following instructions
may result in electric shock, burns and/or severe
injury. The term 'power tool' used in the follow-
ing includes both mains-operated tools (with
mains supply) and battery-operated tools (with-
out mains supply).
KEEP THESE INSTRUCTIONS CAREFULLY!
1) Working area
a) Keep your working area clean and tidy.
b) Do not operate the tool in potentially
c) Keep children and other persons away
2) Electrical safety
a) The mains plug of the power tool must
b) Avoid physical contact with earthed sur-
c) Keep the tool out of the rain. The penetra-
d) Do not use the cable to carry or hang
e) When operating a power tool outdoors,
GB-3
Untidy and poorly lit working areas may
lead to accidents.
explosive environments containing com-
bustible fluids, gases or dusts. Power
tools generate sparks that may ignite dusts
or fumes.
when you are operating the power tool.
Distractions may result in the operator loos-
ing control over the tool.
fit into the mains socket. The plug must
not be modified in any way. Do not use
adapter plugs/connectors in combina-
tion with tools with protective earthing.
Unmodified plugs and fitting sockets reduce
the risk of electric shock.
faces as pipes, heaters, ovens and re-
frigerators. There is an increased risk of
electric shock if your body earthed.
tion of water into a power tool increases the
risk of electric shock.
up the tool or to pull the plug out of the
socket. Keep the cable away from heat,
oil and sharp edges or moving parts of
the tool. Damaged or tangled cables in-
crease the risk of electric shock.
use exclusively extension cables that are
approved for outdoor-use. The use of an