Battery Charger; Safety Instructions - IKRA Mogatec ICMT 2/20 Manuel D'utilisation

Vibration details
Total vibration values (triaxial vector sum) Determined properly EN 50636-2-91,
Uncertainty K = 1,5 m/s
Vibration emission value a
Vibration emission value a

Battery Charger

Eingangsspannung
Frequenz
Ausgangsspannung
Ausgangsstrom
Nennaufnahmeleistung
Empfohlene Akku Typen
Technical changes reserved.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.

SAFETY INSTRUCTIONS

This device is not suitable for use by persons
(including children) with restricted physical, sensory
or mental abilities or insufficient experience and
knowledge or persons who are not familiar with the
instructions. You must never be allowed to use the
machine.
Read and understand the operating instructions before
using the appliance. Familiarise with the control elements
and how to use the appliance properly.
Abide by all the safety measures stated in the service
manual. Act responsibly toward third parties. The operator
is responsible for accidents or risks to third parties.
Keep children and other persons including animals in a
safe distance when using the appliance. Minimum safe
distance is 15 m.
Do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Local regulations may stipulate the minimum age of the user.
38
2
Grass trimmer (handle back / front)
h
brush cutter (handle back / front)
h
CGC20G
220 - 240 V
50/60 Hz
20 V
2 x 2 A
140 W
Typ LI 22-3 / LBC204Z-1
Battery
Battery voltage
Battery capacity (Li-Ion)
Battery power
Recommended chargers
3,6 /4,0 m/s
2
3,7 /3,5 m/s 2
Typ LI 22-3 /
LBC204Z-1
20 V
4 Ah
80 Wh
CGC20G