Cleaning And Care; Descaling - Unold 18320 Notice D'utilisation

Boiling water can cause scalding. Therefore, please handle the appliance
with care when it contains hot water.
11. The appliance features boil dry protection. When operated without water or
with excessive scaling, the appliance shuts off automatically. If this hap-
pens, please allow the appliance to cool off briefly before filling it with water
again or descale the appliance as described in the chapter "Descaling".

CLEANING AND CARE

Allow the appliance to cool before cleaning it.
Before cleaning, always turn off the appliance and unplug it from
the power supply.
1. Do not immerse the base, power cord or kettle in water or other liquids or
wash them in the dishwasher.
2. Wipe off the base and the kettle with a damp cloth and a little dishwash-
ing detergent. Do not use any abrasive scouring agents, steel wool, metal
objects, hot cleaning agents or disinfectants, since they can damage the
appliance.
3. The appliance must be completely dry on the outside before you use it again.

DESCALING

1. To keep the appliance operating efficiently and to prolong its service life,
it should be descaled regularly, depending on the hardness of your water.
2. Use off-the-shelf descaling products for electronic kettles and comply with
the manufacturer's instructions. To descale, fill the kettle half full, maxi-
mum, otherwise the liquid can boil over and can cause severe injuries.
3. Heat the liquid (do not boil!) and allow it to sit for some time in the elec-
tronic kettle.
4. Pour the descaling solution out of the kettle.
5. Then fill it with fresh water and bring to a boil. Pour this water out as well.
Then rinse out the kettle at least twice with clean water.
Copyright UNOLD AG | www.unold.de
17