Cleaning And Care; Descaling - Unold 18575 Notice D'utilisation

Masquer les pouces Voir aussi pour 18575:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
4.
Open the lid to fill in water. When using the
appliance for the first time fill the kettle
with water up to the MAX mark.
5.
Do not fill the kettle with more than 0,5 l of
water and less than 0.2 l.
6.
cautIoN!
If the kettle is overfilled, boiling water may be
ejected and may damage the appliance!
7.
Make sure, that the lid is closed correctly
8.
Plug the power cord into the power socket.
cautIoN
9.
!
If by any reason whatsoever the appliance
has not been switched off automatically by
the boilstop during the last use, it starts
immediately to heat after the plug has been
put in the power socket. In this case wait
until the water boils and the automatic boil
stop switches the appliance off. For the
next boiling use the ON switch to switch the
appliance on.

cleaning anD care

1.
Allow the appliance to cool before cleaning it.
2.
Before cleaning, always turn off the appliance and
unplug it from the power supply.
3.
Do not immerse the base, power cord or
kettle in water or other liquids or wash them
in the dishwasher.
4.
Wipe off the base and the kettle with a damp
cloth and a little dishwashing detergent. Do
not use any abrasive scouring agents, steel

Descaling

1.
To keep the appliance operating efficiently
and to prolong its service life, it should
be descaled regularly, depending on the
hardness of your water.
2.
To descale the kettle, fill it no more than
half full with a solution of half water and
half household vinegar. Bring the liquid to a
boil and leave it in the kettle for a while.
3.
Pour the descaling solution out of the
kettle.
12
10.
Switch on the kettle by pressing the ON/OFF
switch. The control lamp turns on.
11.
Bring the water to boil and then pour out
the water. Then refill with fresh water and
boil again.
12.
The kettle automatically stops heating when
the water boils at the latest.
13.
Please allow the kettle to cool down for a
certain time before using the kettle again
to heat water.
14.
cautIoN
!
As soon as the switch has been pressed, the
appliance cannot be switched off manually,
but only by the automatic stop when the
water boils.
15.
Always use fresh and cold water. Do not
leave water in the kettle.
16.
Switch off and unplug electrical appliances
after use.
wool, metal objects, hot cleaning agents or
disinfectants, since they can damage the
appliance.
5.
The appliance must be completely dry on
the outside before you use it again.
4.
Then fill it with fresh water and bring to a
boil. Pour this water out as well. Then rinse
the kettle at least twice with clear water.
5.
Of course, you can also use commercially
available descaling products; please follow
the instructions on the package.

Publicité

Table des Matières
loading

Table des Matières