Language Settings; Date/Time Settings - JVC GR-DA30U Manuel D'utilisation

12
Getting Started
EN
Data Battery System
You can check the remaining battery power
and the recordable time.
1 1
Set the Power Switch to "REC" or "PLAY"
.
( 9)
2 2
Press DATA, and the battery status screen
appears.
BATTERY CONDITION
LEVEL
100%
50
0
• Press DATA again to return to the normal
screen.
• Data battery status cannot be displayed
during playback or while recording is in
progress.
• If "COMMUNICATION ERROR" appears
instead of the battery status even though
you tried to press DATA several times, there
may be a problem with your battery. In such
a case, consult your nearest JVC dealer.
Using AC Power
4 4
Perform step in "Charging The Battery Pack"
( 11).

Language Settings

The language on the display can be changed
( 22).
1 Select
2 SET
MAX TIME
115min
LANGUAGE
ENGLISH
1 1
Set the Power Switch to "REC" or "PLAY"
.
( 9)
• If set to "REC", the recording mode should
be set to " M" (
2
Press MENU.
3
Select "SYSTEM", press SET or ¤.
4
Select "LANGUAGE", press SET or ¤.
5 5
Select the desired language, press SET or
¤.
6 6
Press MENU.
Press £ whenever you want to return to the
previous menu screen.

Date/Time Settings

1 Select
2 SET
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
( 21, 23).
1 2 2
Perform steps –
( 12).
1
Select "DISPLAY", press SET or ¤.
2
Select "CLOCK ADJ.", press SET or ¤.
3 3
Select the desired date display format,
press SET or ¤.
• Repeat this step to input time display
format (Select from "24h" or "12h"), month,
date, year, hour and minutes.
4 4
Press MENU.
Press £ whenever you want to return to the
previous menu screen/setting.
9).
CLOCK ADJ.
MONTH. DATE. YEAR 12h
JAN. 3. 2007
2 : 10 AM
in "Language Settings"