Helios KWL-BEC Notice D'utilisation page 57

Operating instructions
Comfort controller KWL-BEC
Controller address
If the KWL unit is controller with more than one KWL-BEC, the individual KWL-BEC
must be assigned different addresses. If only one KWL-BEC is active, it must be assigned
the address 1 to ensure trouble-free operation.
Web server
The easyControls control system has a local web server, whereby the KWL unit can be
controlled via an internet browser.
A
ttEntIOn
Use DHCP
When DHCP is activated („Yes" marked), all of the following network settings are auto-
matically assigned and cannot be changed. A condition is that the ventilation unit must
be connected to a router with DHCP configuration.
When DHCP is deactivated, the following data must be manually configured.
IP address
Display depends on DHCP settings (see above)
"Off" Enter the desired IP address
"On" Displays the assigned IP address (Image left)
Gateway
Display depends on DHCP settings
"Off" Enter the desired gateway
"On" Displays the assigned gateway (Image left)
Subnet mask
Display depends on DHCP settings
"Off" Enter the desired subnet mask 255.---.---.---
"On" Displays the assigned subnet mask (Image left)
Portal IP address
Display depends on DHCP settings
"Off" Enter the desired portal IP address
"On" Displays the assigned portal IP address (Image left)
: These settings should only be adjusted by a computer specialist!
25
EN