Helios KWL-BEC Notice D'utilisation page 43

Operating instructions
Dynamic display
for programme gaps
Display 3 sec.
Comfort controller KWL-BEC
Selection of weekdays
The weekday to be edited is selected with the rotary encoder.
Thus, the supply air temperature can be set in freely definable time sections for each day up to 10 times,
(programme: 1/10) (see menu figures below).
Exit
Leave the menu level by pushing "Exit".
Setting range Set value 10 to 45 ° C
From 00:00 - 24:00 hrs. The hours and minutes are set independently in the following step sizes:
Set value: 1 °C; step size Minutes: 1 min.; step size Hours: 1 hr
Programme gaps
If the time of the following programme section is not directly added to the time of the previous
pro- gramme section, there is a gap. The programme determines how many gaps there are in the ind-
ividually edited programme and briefly shows these on the display. The target temperature is set
at 0 °C or the minimum temperature 16.5 °C (PHI setting) in open gaps.
Copy function
If there is no need to individually edit each day, there is the option to copy a defined programme
for each desired weekday.
Copy weekday(s) and start programme
11
EN
...to Sunday
...to 10 v10