DURAVIT SensoWash Slim 611000 Notice D'utilisation page 28

Problem
The water tem-
perature is not
warm enough.
The water
spray from the
EN
spray wand
suddenly stops.
A jet of water is
not emerging
from the spray
wand.
Night light function
The night light
does not come
on.
The night light
stays on conti-
nuously.
24
Potential cause
The water tempera-
ture has been set to
Off or Low.
The function au-
tomatically stops
after 2 minutes.
The spray nozzle is
clogged.
The night light has
been set to Off
mode.
The night light is
in Auto mode and
the ambient light is
bright.
The night light
has been set to
On mode.
The night light is in
Auto mode and the
ambient light is dim.
The ambient light
sensor window is
not clean.
Solution
> Adjust the "Water
temperature"
Medium or High.
This is normal.
> Clean the spray
nozzle.
This is normal.
> Set the night light
to Auto or On mode.
This is normal.
This is normal.
> Set the night light
to Auto or Off mode.
This is normal.
> Clean the "Ambient
light sensor"
window.
Ch.
6.2
to
6
7.2
6.3
6.3
D