6. Operating
6.1 Switching the SensoWash
> Press "Power"
A green Status LED indicates "On mode".
> Press "Power"
Wash
. A red Status LED indicates "Standby mode".
®
6.2 Shower functions
SensoWash
®
before and after washing functions are used. The shower func-
tions terminate automatically after 2 minutes or immediately
when "Stop"
Activating / deactivating "Rearwash"
Gentle and safe rear cleansing.
1
> Press Plus
or Minus to
activate Re-
arwash.
Alternatively press "Rearwash"
Rearwash. Press "Rearwash"
Rearwash or after 2 min. auto stop.
on the seat unit to switch on SensoWash
A
on the seat unit again to switch off Senso-
A
automatically cleans the retracted spray wand
is pressed.
8
2
Rearwash is
active, the
spray wand
extracts slowly
on / off
®
3
> Press Stop to
end Rearwash
or after 2 min.
auto stop.
on the seat unit to activate
C
on the seat unit again to stop
C
.
®
EN
13