Choosing A Mounting Method - Honeywell TrueSTEAM Guide D'installation

Choosing a Mounting Method

Before installing TrueSTEAM in a home, you must decide which mounting method you want to use:
Which is right for you?
DUCT MOUNTING – if you can mount
TrueSTEAM onto the supply duct of
the HVAC system:
The generated steam goes directly into the
supply duct.
This is the simplest type of installation, but
it requires that a suitable mounting location
can be found on the supply duct.
S u
n
t u r
R e
This manual covers duct mounting of TrueSTEAM. For Remote Mounting Instructions, see "Appendix C: Remote
Installation" on page 36 or "Document 69-2317" (included with Remote Mounting Kit).
Before proceeding:
I have decided to use:
TrueSTEAM Humidification System 69-2285EF—01
l y
p p
M29596
Duct Mounting Remote Mounting
REMOTE MOUNTING – if a suitable
mounting location can not be found
on the supply duct:
The TrueSTEAM can be mounted up to 20
feet away from the supply duct for
select models.
A remote hose must be installed to carry
steam from TrueSTEAM to the supply duct.
You will need to use a remote mounting kit
(see "Appendix B: Parts List" on page 35).
l y
p p
S u
M29597
5