Hitachi NV 90AG Mode D'emploi page 12

English
APPLICABLE LUBRICANTS
Type of lubricant Name of lubricant
Recommended oil SHELL TONNA
Motor oil SAE10W, SAE20W
ISO VG32 ~ 68
Turbine oil
(#90 ~ #180)
Noise Information
Noise characteristic values in accordance with EN 792-13:
The typical A-weighted single-event sound power level
L ,1s,d = 104 dB.
WA
The typical A-weighted single-event emission sound
pressure level at work station
L ,1s,d = 96 dB.
pA
Uncertainty KpA: 2.5 dB (A)
These values are tool-related characteristic values and
do not represent the noise development at the point of
use. Noise development at the point of use will for
example depend on the working environment, the
workpiece, the workpiece support and the number of
driving operations, etc.
Depending on the conditions at the workplace and the
form of the workpiece, individual noise attenuation
measures may need to be carried out, such as placing
workpieces on sound-damping supports, preventing
workpiece vibration by means of clamping or covering,
adjusting to the minimum air pressure required for the
operaion involved,etc.
In special cases it is necessary to wear hearing protection
equipment.
Vibration Information
The typical vibration characteristic value in accordance
2
with EN 792-13: 3.8 m/s
2
Uncertainty K: 1.5 m/s
This values is a tool-related characteristic value and
does not represent the influence to the hand-arm-system
when using the tool. An influence to the hand-arm-
system when using the tool will for example depend on
the gripping force, the contact pressure force, the working
direction, the adjustment of energy supply, the workpiece,
the workpiece support.
12