Display - Gazelle Shimano Steps-system Démarrage Rapide

„ Basic status display
Displays the status of your bicycle and travel data.
The gear position is only displayed when using electronic gear shifting.
.

Display

(A)
Battery level indicator
(B)
. . Display E
Maintenance alert
Indicates that maintenance is required. Contact
your place of purchase or a bicycle dealer if this
Your bike can be equipped with automatic
icon is displayed.
and manual shifting.
(C)
Gear position display
If you shift manually, the switch is located on
< SC-E6100 >
the right-hand side of the handlebar.
Current gear position
Start mode gear position*1
Electronic shifting
Shifting advice*2
Bikes equipped with the Di system have
This notifies you of the recommended timing
an electronic shift capability. The control
at which to shift based on the bicycle riding
is positioned on the right-hand side of the
conditions.
handlebar.
(D)
Travel data display
Basic status display
(E)
Displays the status of your bicycle and Gear shifting mode*1*3
Displays current gear shifting mode as [Auto] or
travel data.
[Manual].
The gear position is only displayed when
using electronic gear shifting.
(F)
Assist gauge
Displays assistance level.
(A) Battery level indicator
(G)
Current assist mode
(B) Maintenance alert
(H)
Current speed*4
Indicates that maintenance is required.
Contact your place of purchase or a bicycle
(I)
Current time
dealer if this icon is displayed.
(J)
Light icon
Indicates that the light connected to the drive unit
(C) Gear position display
is lit.
<SC-E >
Current gear position
(K)
Bluetooth LE icon
®
Start mode gear position*
Displayed when connected over Bluetooth LE.
Shifting advice*
*1
Only for electronic gear shifting with internal
This notifi es you of the recommended timing at
geared hub.
which to shift based on the bicycle riding conditions.
*2
Only for electronic gear shifting with the gear
(D) Travel data display
shifting mode set to [Manual].
*3
[Manual] will always be displayed for rear
(E) Gear shifting mode* *
derailleur models.
Displays current gear shifting mode as [Auto] or [Manual].
*4
For SC-E7000, the traveling data displayed in this
(F) Assist gauge
location can be changed.
Displays assistance level.
(G) Current assist mode
GAZ_Snelstart Shimano Steps_21_E02_V01.indd 54
en E
31
< SC-E6100 >
(J) (K)
(I)
(H)
(G)
(F)
(E)
< SC-E7000 >
(A) (K) (B)
(G) (H)/(D)
(A)
(B)
(C)
(D)
(E) (C)
31-08-2021 09:44