Gazelle Shimano Steps-system Démarrage Rapide page 49

e locked position, and then remove it.
. . Installing a down tube type battery
. Insert the battery from below.
HANDLING THE BATTERY
Align the concave section on the bottom of the battery with the convex section
Installing the battery
on the battery holder and then insert the battery.
y from below.
2.
Slide the battery.
. Slide the battery.
Push the battery until you hear it click into place.
ction on the bottom of the battery with the convex section on the
Push it in firmly until you hear it click into place.
hen insert the battery.
HANDLING THE BATTERY
ANDLING THE BATTERY
Removing the Battery
Removing the Battery
Down tube mount type
Down tube mount type
1.
Insert the key.
1.
Insert the key.
Press the power switch to turn the power OFF, and then insert the key into the socket on
. Remove the key.
Press the power switch to turn the power OFF, and then insert the key into the socket on
the battery mount.
3.
Return the key to the locked position and then remove it.
Remove the key.
the battery mount.
<BT-E6010>
. . Removing a down tube type battery
<BT-E6010>
Return the key to the locked position, and then remove it.
. Insert the key.
Push the on-o button to switch OFF the power, and insert the key into the socket
on the battery holder.
Built-in type
The following procedure uses a type of frame where the battery is installed/removed from th
<BT-E8010/BT-E8014>
lower side of the down tube as an example.
<BT-E8010/BT-E8014>
Refer to the user's manual for details.
1.
Use the following procedure to insert from the lower side of the
battery.
2.
(1) Insert from the lower side of the battery.
Release the battery lock.
2.
Release the battery lock.
(2) Slide the battery. Push it in firmly until you hear it click into place.
Turn the key until you feel it make contact.
Turn the key until you feel it make contact.
GAZ_Snelstart Shimano Steps_21_E02_V01.indd 49
Power switch
Power switch
49
Power switch
Power switch
Key
Key
Socket
Socket
(2)
EN
31-08-2021 09:44