Gazelle Shimano Steps-system Démarrage Rapide page 50

/BT-E8014>
. Release the battery lock.
Power switch
Turn the key until you can feel that contact has been made.
3.
. Carefully slide and remove the battery.
ey.
battery lock.
o the locked position, and then remove it.
til you feel it make contact.
ure uses a type of frame where the battery is installed/removed from the
anual for details.
. . Installing an integrated type battery
wing procedure to insert from the lower side of the
efully remove the battery.
. Use the following procedure to insert the battery from the bottom.
( ) Insert the battery, bottom first, into the underside of the tube
he lower side of the battery.
( ) Slide the battery. Push until you hear the battery click into place.
Then fit the separate battery cover (if supplied)
tery. Push it in firmly until you hear it click into place.
. . Removing an integrated type battery
. If there is a separate plastic cover for the battery in place, remove this from the
bicycle first.
the battery in, pull the battery to confirm that it is locked securely.
. Release the battery lock.
( ) Insert the key in the battery holder's lock cylinder.
( ) Support the battery with one hand and turn the key clockwise with the other.
GAZ_Snelstart Shimano Steps_21_E02_V01.indd 50
Key
Slide and carefully remove the battery.
(2)
(1)
52
50
Socket
52
31-08-2021 09:44