Electrical Connection; Connection In Six-Wire Configuration - HBM Z6 Série Manuel D'emploi

5

Electrical connection

Z6...
The following can be connected for measurement signal
conditioning:
S carrier-frequency amplifiers
S DC amplifiers
designed for strain gauge measurement systems.
The load cells are delivered with a six-wire configuration.
5.1

Connection in six-wire configuration

Fig. 5.1 Pin Assignment
With this connector pin assignment, the output voltage at
the measuring amplifier is positive when the transducer is
loaded.
A1027-4.1 HBM: public
Electrical connection
gray Sense lead (-)
black Excitation voltage (-)
white Measurement signal (+)
blue Excitation voltage (+)
green Sense lead (+)
red Measurement signal (-)
Shielding/drain wire,
connected to housing
13