Dometic ORIGO 2000 Notice D'utilisation page 13

Masquer les pouces Voir aussi pour ORIGO 2000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
Dometic ORIGO
7.3
Connecting the stove electrically
(Dometic ORIGO 2500 and 4300 only)
WARNING! Danger of injury!
!
The stove may only be connected by a qualified specialist.
The following information is intended for technicians who are
familiar with the guidelines and safety precautions to be applied.
Observe the following safety instructions for the electrical connections:
NOTICE! Risk of short circuit!
A
 Always use sockets which are grounded and secured by
residual current circuit breakers.
 If you have to feed cables through metal walls or other walls with
sharp edges, use ducts or tubes to prevent damage.
 Do not lay cables which are loose or bent next to electrically
conductive material (metal).
 Fasten the cables securely.
 Do not pull on the cables.
 Lay the cables so that they cannot be tripped over or damaged.
➤ Connect the stove to the mains according to the label on the device. The
black L1 wire is the ungrounded conductor.
➤ Secure the cable with a clamp.
EN
Mounting the stove
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Origo 2500Origo 4100Origo 4300

Table des Matières