WIKA TF44 Mode D'emploi page 8

3. Safety
3.5 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to
EN
equipment.
▶
▶
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel
who, based on their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.
3.6 Labelling, safety marks
Product label (example)


Model

Number of the production order

Permissible measuring range

Probe version

Measuring element
■
Connection method
■
Tolerance of the measuring element
■
Before mounting and commissioning the instrument, ensure you read the
operating instructions!
8
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
Keep unqualified personnel away from hazardous areas.

WIKA operating instructions model TF44
