Titan M-4 Mode D'emploi page 5

Technical Data
Max. operating pressure
Material inlet thread size
Diffuser thread size
Wetted parts material
Operating temperature
range
Maximum material
temperature
Weight (cpl. incl. tip guard
and tip)
Introduction
This airless spray gun is to be used for the high pressure atomization of liquid
coating materials.
The 3600 PSI (250 bar) version is especially suitable for processing spray filler.
The 7700 PSI (530 bar) version is best suited for protective coating
applications and can be used with all pumps that can generate such a high
pressure.
Using the Gun Trigger Lock
Always engage the gun's trigger lock when the gun is not in use.
1. To lock the trigger, turn the trigger safety lock up as far as it will go.
2. To unlock the trigger, turn the safety lock downwards.
M-4/M-8 GB
High-grade steel, aluminum, PTFE, hard
1
Gun locked
(gun will not spray)
M-4
3600 PSI
(25 MPa, 250 bar)
3/8" NPS
7/8" NPS
41°F to 104°F (5ºC to 40ºC)
109°F (43ºC)
1.5 lbs (680 g)
2
Gun unlocked
(gun will spray)
M-8
7700 PSI
(53 MPa, 530 bar)
1/4" NPS
7/8" NPS
metal
5