Miele XKS 3100 W Mode D'emploi page 43

en - Signing a household appliance onto the WiFi net-
Options in the sub-menu 
Miele@home system settings
Certain settings can be adjusted in Set-
tings mode  on your refrigeration ap-
pliance via  Miele@home system set-
tings.
WPS WPS pushbutton

Wireless access point
(soft access point)

Reset WiFi module

WiFi module
default settings
– WPS pushbutton
As an alternative to networking via the
Miele@mobile App we recommend us-
ing WPS (Wireless Protected Setup).
To do so you will need a WPS-compat-
ible router.
 Touch WPS.
For a certain time an attempt will be
made to create a WiFi link.
 Activate the "WPS" function on your
router within two minutes.
Once connection has been created, 
will appear in the display.
 Confirm with
OK
The display changes to the start screen,
and  appears in the top right.
If a connection could not be created,
the display shows .
You have probably not activated WPS
at your router quickly enough. Repeat
the steps above.
.
work via smartphone/tablet
– Wireless access point (soft access
point) 
You can create a direct link from your
refrigeration appliance to your mobile
device (e.g. smartphone or tablet). This
connection is necessary in order to cre-
ate a network connection with the
Miele@mobile app.
A full description for this can be found
under "Signing on using the
Miele@mobile App", Integrating a
household appliance via a mobile
device".
 Touch .
For a certain time an attempt will be
made to create a direct link.
 Confirm the link creation at the mo-
bile device.
The display changes to the start screen,
and  appears in the top right.
If no link is confirmed after approx.
15 minutes, the procedure is cancelled.
The display changes to the start screen.
43