Télécharger Imprimer la page

Helo PURE Mode D'emploi page 50

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
Tank on (min:sek)
Tank off (min:sek)
Connecting door contact and its function
A magnetic contact to detect when the door is open can be connected. The contact to
be used is Tylö item number 90908035. The contact is connected to the heater accor-
ding to the instructions supplied. A door contact must be connected for the delayed
start function. A door contact must also be connected to use an external switch. If
the heater has been programmed for delayed start and the door is opened after the pro-
EN
gram is activated, the program will be disrupted and the indicator will flash. To reacti-
vate the program for delayed start, press the Start button and close the door within 60
seconds.
If the panel is placed inside the sauna, you have 60 seconds to go out and close the
door once delayed start has been activated.
If the door is opened and left open for more than 5 minutes during operation, the heater
will be switched off and error code 19 will show on the panel.
Using an external switch
An external switch for starting/stopping the heater not mounted on the control panel
can be connected. A door contact must be installed. See wiring diagram supplied
with external switch for connection. We recommend using Tylö's external switch (item
number 90908047). This also provides indication via LED of whether the sauna is on,
programmed for delayed start and error status for a magnetic door contact (if fitted)
A continuous light indicates that the heater is on.
Slow flash indicates that the heater is programmed for delayed start.
Rapid flash indicates that the door has been opened when the heater is programmed
for delayed start. Alternatively, the door has been open for more than 5 minutes during
operation or has been opened after the heater has been switched off. The control panel
will then require resetting.
Humidity is prioritised
1
2
3
01:45
02:00
02:17
02:33
02:23
02:08
01:51
01:35
50
Humidity settings
Temperature is prioritised
4
5
6
7
02:47
03:05
03:20
01:21
01:03
00:48
8
9
10
03:35
03:50
Continuous
00:33
00:18
No break

Publicité

loading