Helo PURE Mode D'emploi page 46

EN
A. Light - Switches light on/off
B. Indicators for light, door contact, delayed start and to show that the heater
is working.
C. Start, stop and error indication
D. Enter values.
E. Function selection for temperature, delayed start, operating time and hu-
midity (for certain products only).
F. Function selection buttons.
G. Temperature display. Displays current temperature
First start
Set heater switch to ON. The indicator diodes (B) will flash a few times. This
indicates that the control panel is connecting to the heater. When contact is
made, the diodes will cease flashing and diodes 1-7 (D) corresponding to the
program no. selected will flash 4 times to show setting. This will also occur
after any disconnection of power.
Pure's default setting is to regulate a heater to max. 110°C and max. operating
time of 6 hours. Maximum temperature and operating time can be adjusted.
The Pure is factory set to program 1 for Sauna/Combi and program 6 for
Steam. These programs only need to be changed if you want to change the
temperature or the running time
F
46
G
A
B
C
D
E