Product Elements; For Your Safety - Bosch PBH 160 RE Instructions D'utilisation

pbh160_bu_1609929F02_t.fm Seite 2 Dienstag, 5. Oktober 2004 11:25 11

Product Elements

Please open the foldout page with the illustration of the
tool and leave it open while you read these operating
instructions.
The numbering of the machine elements refers to the
illustration of the machine on the graphic page.
1 Ring gear exchangeable drill chuck, 13 mm
2 SDS-plus exchangeable drill chuck
3 Tool holder (SDS-plus)
4 Dust protection cap
5 Locking sleeve
6 Exchangeable drill chuck locking ring
7 Locking button
8 On/off switch
9 Speed control
10 Right/left rotation switch
11 Operational mode selection switch
12 Depth stop button
13 Auxiliary handle wing screw
14 Auxiliary handle
15 Depth stop
16 Drill chuck holder
17 Drill chuck*
18 SDS-plus drill chuck shaft*
19 Assembled drill chuck*
20 SDS-plus adapter*
21 Drill chuck key*
22 Depth stop scale value
*
Not all the accessories illustrated or described are in-
cluded in standard delivery.
1 609 929 F02 • (04.10) T

For Your Safety

Read all instructions. Failure to fol-
low all instructions listed below may re-
sult in electric shock, fire and/or serious
injury.
SAVE THESE INSTRUCTIONS.
In addition, the general safety
notes in the enclosed booklet must
be observed.
Wear hearing protection. The noise can cause
s
loss of hearing.
Do not use the machine with a damaged ca-
s
ble. If the cable is damaged while working, do
not touch the damaged cable but pull the
mains plug. A damaged cable increases the risk
of an electrical shock.
For machines used outdoors, connect to the
s
mains using a fault current (FI) protection
switch.
Use suitable detectors to find hidden utility
s
lines or call the local utility company for as-
sistance. Contact with electric lines can lead to
fire or electrical shock. Damaging a gas line can re-
sult in an explosion. Penetrating a water pipe will
cause property damage or an electrical shock.
Always use the auxiliary handle provided with
s
the machine. The loss of control over the machine
can result in injuries.
Secure the work piece. A work piece clamped
s
with clamping devices or in a vice is held more se-
curely than by hand.
Do not work with materials containing asbes-
s
tos. Asbestos is considered carcinogenic.
Hold the machine firmly with both hands while
s
working and provide for secure footing. The
machine is more securely guided with both hands.
Wait until the machine has come to a stand-
s
still before placing it down. The insertion tool
can become caught and lead to loss of control over
the machine.
English–2