Functional Description; Intended Use; Product Features - Bosch GBH 2-23 REA Professional Notice Originale

All manuals and user guides at all-guides.com
OBJ_BUCH-404-002.book Page 8 Friday, March 13, 2009 3:51 PM
8 | English
Keep your workplace clean. Blends of ma-
terials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged
cable. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is
fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the
original plug.
The severed plug must be disposed of to avoid
a possible shock hazard and should never be
inserted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a
residual current device (RCD) with a rated
residual current of 30 mA or less.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone. It is also suitable for
drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and
right/left rotation are also suitable for screw-
driving.
1 619 P07 080 | (13.3.09)

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Selector switch for drilling/hammer drilling
5 Release button for drilling/hammer drilling
selector switch
6 Rotational direction switch
7 Lock-on button for On/Off switch
8 On/Off switch
9 Dust box, complete (micro filtersystem)
10 Release button of the dust extraction
11 Unlocking button of the dust box
12 Auxiliary handle
13 Button for adjustment of the telescopic
guide
14 Dust extraction
15 Telescopic guide
16 Button for depth stop adjustment
17 Dust collector for drill bit
18 Securing screw for key type drill chuck*
19 Key type drill chuck*
20 SDS-plus adapter shank for drill chuck*
21 Guide groove of the dust extraction
22 Dust box flap
23 Filter element (micro filtersystem)
24 Adapter box for external dust extraction*
25 Vacuum connection*
26 Vacuum hose*
27 Depth stop
28 Release button of the dust collector
29 Dust collector for core bits*
30 Latching projection of the dust collector*
31 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools