Festool ETS EC 125/3 EQ Notice D'utilisation D'origine page 10

ETS EC 125
GB
CAUTION
Operating noise
Damage to hearing

Use ear protection!
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Vibration emission level
(3 directions)
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3 Intended use
The sanders are designed for sanding wood, plas-
tic, composite, paint/varnish, filler and similar ma-
terials as directed. With mixed dust containing met-
al (such as dust resulting from paint sanding in the
automotive industry) and when sanding damp sur-
faces, special safety instructions must be followed.
The sanders are not intended to be suitable for
grinding bare metal. Material containing asbestos
cannot be processed.
The user is liable for improper or non-in-
tended use.
4 Technical data
Random orbit sander
Power
Idle speed
Sanding stroke
Sanding pad
Weight (without mains cable,
with sanding pad)
Safety class
5 Machine features
[1-1] ON/OFF button
12
(vector sum for three
h
a = 4,8 m/s
h
K = 1,5 m/s
ETS EC 125/3 EQ
400 W
6000 - 10000 rpm
3,0 mm
D 125 mm
1.2 kg
/II
[1-2] Speed control
[1-3] Sanding pad
[1-4] Plug it-connection
[1-5] Extractor connector
[1-6] LED for extractor signal
The specified illustrations appear at the beginning
of the Operating Instructions.
6 Operation
2
2
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
Connecting and detaching the mains power cable -
see Fig. [2].
Before switching on the machine make sure
that the bayonet fitting at the power supply
cord is closed fully and locked.
ON/OFF button [1-1]
ON Press the ON/OFF button [1-1]
OFF Press the ON/OFF button [1-1]

When the extractor signal is active, the power
tool cannot be switched on without a connected
extractor hose - see chapter 7.3.
7 Settings
Risk of injury, electric shock

Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
7.1 Electronics
The machine features full-wave phase control elec-
tronics with the following features:
Smooth start-up
The electronically controlled smooth start-up en-
sures that the machine starts up jolt-free.
WARNING
WARNING