D Installation - Tectro T8000 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
Energy save tips
Please use the unit in the recommended room size. (Please refer to the Specifications).
Do not locate air conditioner where furniture or other objects can obstruct the air flow.
Keep blinds/curtains closed during the sunniest part of the day.
Close the fireplace damper, floor and/or wall registers, so cool air does not escape through the chimney
or duct work.
NOTE!
Never close the room completely. Avoid under pressure in the room; this disturbs exhaust flow
from geyser, (kitchen exhausters and/or oven).
Keep the filters clean.
Set the unit to maximum cooling and high speed ventilation for the initial startup, then adjust the unit
to a comfortable setting.
D
INSTALLATION
Mounting of the unit
This unit is a PORTABLE AIR CONDITIONER. It can be moved from room to room, so, the cooling can follow
you anywhere. The mounting is easy, beneath a window or wall. Please refer to either of the following ways:
Using the foam strips
1
Connect the supplied foam strips with the exhaust pipe, let the hot air flow to the outside.
2
Should the foam strip(s) be too large, cut off the extra part to fit the window.
Foam strips
Adaptor ¸
4
55

Publicité

Table des Matières
loading

Table des Matières