Maintenance - Tectro T8000 Manuel D'utilisation

By water tube (continuous drainage)
1 Pull out the water tank.
2
Pull out the water tube inside the unit.
Take off the cap on the tube.
3
Remove the cap of the drain hole.
4
Connect the water tube through the drain hole.
5
Push the water tank into place.
6
Connect the water tube of the unit with a water
tube of O.D. 12 mm
G

MAINTENANCE

NOTICE!
Always unplug the unit from the mains before beginning the cleaning.
Cleaning the housing
Use a soft, damp cloth to wipe the body clean.
Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions.
These all could possibly hurt the cabinet.
Cleaning the filter
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters and then rinse
thoroughly under running water (no hotter than 40°C).
Dry thoroughly before replacing.
NOTICE!
Never operate the unit without the filters.
Watertube
of O.D. 12 mm
4
59