Publicité
1. Thank you ...
2. Care ...
3. Warranty
4. You will need
5. Dimensions
6. Required Tools
for purchasing this IKARUS product. It was carefully packed and checked at our facility. Nevertheless, please check
immediately that this product is complete and undamaged. You will understand that we cannot accept any claims
arising at a later date.
is a very sensible subject for this high performance helicopter. Assembled and flown by skilled hands it offers fun and
satisfaction. Nevertheless, it is not a toy and should be operated with care and responsibility. We have to reject any
claims arising from inexperienced use or misuse.
Helicopters are subject to various physical laws which can result in a successful flight or a disappointing crash. Our
job has been to develop a safe flying model. The model has been professionally developed and tested substantially.
The assembly is now your part. Please carefully read, understand and follow the building steps. Indicated angles and
other measurements have to be followed precisely. Therefore: Build and maintain your helicopter very carefully.
If you have any doubts, take a break, think carefully or ask an experienced model helicopter pilot. It's
worth the effort.
Most of the parts are packed in building steps. First read the entire instructions manual and familiarize yourself with
the system. Open only one bag at a time as needed for the building step and put the parts in a small bin or bowl.
Assemble the helicopter step by step, bag by bag.
Important Note for those who have purchased the ARF (pre-built) version:
Even as this helicopter mechanics have been pre-assembled, it is your responsibility to check that every-
thing is correctly assembled and no screws and bolts got loose during handling all the way to you. Your
further building steps start at page 12 of this manual.
We guarantee that this product is free of manufacturing defects in material and workmanship according to the cur-
rent "IKARUS Business Terms". No claims will be accepted for failure due to a crash, incompetent handling, alter-
ations, lack of maintenance and incorrect or commercial use. Direct or subsequent damage claims are not accepted.
Item
Item No.
The Motor
67579
67611
70503
67965
The Motor Controller
720667
70504
The R/C System
7071001
171230
The Gyro System
720717
720654
The Flight Battery
2027019
The Charger
2027014
The Connectors
8013003
Main Rotor Diameter
860 mm (33.8 in)
Length
760 mm (29.9 in)
Weight
from 1000 g (2.2 lbs)
• Razor blade knife (X-acto with blade # 11)
• Phillips screw driver small and medium
• Allen key 1.5 and 2.5 mm
• A pair of pointed pliers
• Pitch Gauge (IKARUS # 67680)
• 5.5 mm Wrench
• Bowls for small parts
• CA (Speed) Glue like ZAP
• Loctite Thread Locker
• Ball-Link Pliers (IKARUS # 67958)
• Blade Balancer (IKARUS # 631080)
• Tail Rotor Blade Balancer (IKARUS # 67957)
Introduction
Description
Sport Motor (brushed) and
12 T Pinion or
H8 – Hi-Performance Brushless Motor and
15 T Pinion
Heli 4000 Digital Controller for brushed motors or
Lexors H40 Brushless Controller
6 channel radio system
Gigatronic Helicopter Program Module
or a computerized radios system with helicopter program
Lexors Micro Servo 230 (4 required)
Profi Micro Gyro with Heading Hold or
Mini Gyro
Lithium-Polymer battery, 2480 mAh (2 pieces)
Multi-Charger for Li-Po and NiMh/Nicad batteries
Low resistance Gold Connectors (4 sets required)
3
Publicité
