Dometic TEC 30D EV Manuel D'utilisation, D'entretien Et D'installation page 33

TABLE OF MAINTENANCE OPERATIONS
Important
Keep the appliance in a state of maximum efficiency, by carrying out the planned
maintenance operations foreseen by the manufacturer. If these are properly carried
out, they will ensure the appliance provides optimum performance, a longer working
life and constant compliance with the safety requirements.
Table 4: Maintenance frequency
Action
Make sure that the combustion and
cooling air inlet ducts are intact and free
from residues.
Change the fuel filter
Check that there are no leaks
check the fuel injection pump
Check the lubricant level in the oil sump
Change the lubricant oil
Clean the motor cooling devices
Clean the oil filter
Check that there are no oil leaks
If necessary, check the play of the
valves
X* = must be carried out by a HATZ authorised retailer or Dometic skilled personnel
X** = If the equipment is used in dusty environments, replacements should be made twice as
frequently.
1st month
Daily FIRST 50
hours
X
X
after use
X
before
use
X
X
after use
- 33 - Use, maintenance and installation instructions
TEC 30D EV
Every 250 Every 500
hours hours 1000 hours
X
X
X
X
GB
Yearly or
X*
X