Dometic TEC 30D EV Manuel D'utilisation, D'entretien Et D'installation page 21

STORAGE
In the event of prolonged inactivity, check the conditions of the storage area, the type of
packaging and check that the conditions are such as to ensure proper maintenance of
the unit.
Important
Avoid storing in environments that are damp or exposed to the weather.
INSTALLING THE UNIT
Important
All phases of installation must be considered, from the time the general plan was
drawn up. Before starting these phases, as well as defining the installation area, the
installation technicial who will be carrying out these operations must, if necessary,
implement a "safety plan" to safeguard the persons directly involved from harm, and
must scrupulously follow all laws, with particular reference to those regarding mo-
bile work sites.
– The installation area must have suitable environmental conditions (light, ventilation, etc.).
– The area of installation must be arranged so that around the equipment there is at least
70 mm of free space for a proper cooling of the equipment.
– If the area of installation of the equipment is closed on all sides, an air intake must be pro-
vided in front of the opening door (at least 240 cm
– The area of installation must have a suitable capacity for the weight and vibrations of the
equipment and must be stable and levelled in order to ensure its correct support.
– The installation area must have all the supply and drainage connections required.
2
).
- 21 - Use, maintenance and installation instructions
TEC 30D EV
GB