Safety Information - Dometic TEC 30D EV Manuel D'utilisation, D'entretien Et D'installation

GENERAL RULES
– During the design and building phase, the manufacturer, other than having adopted all of
the "regulations of best building practices", has paid particular attention to the aspects
which could cause safety and health risks to people who interact with the equipment.
– The equipment has been designed and built in compliance with the current safety laws
and regulations (see compliance declaration).
– The purpose of this information is to make users aware and place particular attention on
preventing any risk. Prudence is, however, irreplaceable. Safety is also in the hands of all
operators who interact with the equipment.
– Please read the instructions provided in this manual carefully, and also read the instruc-
tions affixed directly to the unit, in particular those relating to safety. Dedicating a short
time to reading this information will help avoid unnecessary accidents; it is always too late
to remember what you should have done when you have already done it.
– Pay particular attention to the meaning of the symbols on the unit; their shape and colour
are significant for the purposes of safety. Make sure they remain legible, and follow the
instructions given.
– Do not tamper with, elude, eliminate or bypass the safety devices fitted. Failure to comply
with this requirement may result in severe risks for the health and safety of persons.
– Staff carrying out any type of operation on the unit throughout its working life must have
specific technical qualifications, abilities and experience that has been acquired in and is
recognised by the specific sector. If these requirements are lacking, damage to the health
and safety of persons may result.
– When working, only use the clothing and/or personal protection devices indicated in the
instructions for use supplied by the manufacturer, or those foreseen by local laws on safe-
ty in the workplace.
– During normal use or for whatever operation, always ensure there is sufficient access
space to use the comands in conditions that are not liable to result in a risk for the health
and safety of persons.
– Every operation, unless expressly indicated, must be carried out with the motor turned off
and after allowing sufficient time for it to cool down, so as to avoid the risk of scalding.
The manufacturer shall not respond for unsuccessful functioning of the equipment.

SAFETY INFORMATION

- 13 - Use, maintenance and installation instructions
TEC 30D EV
GB