Preparation For Installation - Agilent Technologies Turbo-V 750 TwisTorr Mode D'emploi

16 Instructions for Use

Preparation for Installation

Preparation for Installation

The Turbo-V 750/850 TwisTorr Pumping System is supplied in a
special protective packing. If this shows signs of damage, which may
have occurred during transport, contact your local sales office.
When unpacking the system, be sure not to drop it and avoid any
kind of sudden impact or shock vibration to it.
WARNING! Some models weight more than 18 Kg (models: 969-8814, 969-8816, 969-6014,
969-6016, 969-6017). In those cases the handling of the pump must be carried
out with proper weight-lifting equipment or, at least, by two people.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100 % recyclable and complies with EEC Directive
94/62 and successive modifications to protect the environment.
In order to prevent outgassing problems, do not use bare hands to handle
CAUTION!
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
Normal exposure to the environment cannot damage the Tur-bo-V 750/850
NOTE
TwisTorr Pumping System. Nevertheless, it is advisable to keep it closed until it
is installed in the system, thus preventing any form of pollution by dust.
292/406 Turbo-V 750/850 TwisTorr User Manual / 87-901-020-01 (A)