Preparation For Installation - Agilent Technologies Turbo-V 903 Notice De Mode D'emploi

17 Instructions for Use

Preparation for Installation

Preparation for Installation

The TV 903 Pumping System is supplied in a special protective packing. If this
shows signs of damage, which may have occurred during transport, contact
your local sales office.
When unpacking the system, be sure not to drop it and avoid any kind of
sudden impact or shock vibration to it.
Do not dispose of the packing materials in an unauthorized manner. The
material is 100% recyclable and complies with EEC Directive 85/399.
In order to prevent outgassing problems, do not use bare hands to handle
CAUTION!
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
Normal exposure to the environment cannot damage the TV 903 Pumping
NOTE
System. Nevertheless, it is advisable to keep it closed until it is installed in the
system, thus preventing any form of pollution by dust.
Figure 1
250/306
PUMPING SYSTEM 969‐8811
Preparation for installation
Turbo-V 903 Pumping System User Manual / 87-901-016-01
48VDC POWER SUPPLY 969‐6501
(A)