Maintenance; Disposal - Agilent Technologies Turbo-V 903 Notice De Mode D'emploi

Maintenance

The TV 903 Pumping System does not require any maintenance. Any work
performed on the system must be carried out by authorized personnel.
Before carrying out any work on the system, disconnect it from the mains,
WARNING!
vent the pump by opening the appropriate valve, wait until the rotor has
stopped turning and wait until the surface temperature of the pump falls
below 50 °C.
In the case of breakdown, contact your local Agilent service center who can
supply a reconditioned pump to replace that broken down.
Before returning the pump to the constructor for repairs, or advanced exchange
NOTE
service, the "Health and Safety" sheet attached to this instruction manual must
be filled-in and sent to the local sales office. A copy of the sheet must be
inserted in the system package before shipping.
If a pump is to be scrapped, it must be disposed of in accordance with the
specific national standards.

Disposal

Meaning of the "WEEE" logo found in labels The following symbol is applied
in accordance with the EC WEEE (Waste Electrical and Electronic Equipment)
Directive. This symbol (valid only in countries of the European Community)
indicates that the product it applies to must NOT be disposed of together with
ordinary domestic or industrial waste but must be sent to a differentiated
waste collection system. The end user is therefore invited to contact the
supplier of the device, whether the Parent Company or a retailer, to initiate
the collection and disposal process after checking the contractual terms and
conditions of sale.
Turbo-V 903 Pumping System User Manual / 87-901-016-01
Instructions for Use

Maintenance

(A)
17
257/306