Preparation For Installation - Agilent Technologies TwisTorr 74 FS Notice De Mode D'emploi

Preparation for installation

The TwisTorr 74 FS pump is supplied in a special protective pack-
ing. If this shows signs of damage which may have occurred during
transport, contact your local sales office.
When unpacking the pump, be sure not to drop it and avoid any kind
of sudden impact or shock vibration to the TwisTorr 74 FS pump.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100% recyclable and complies with EEC Directive
94/62 and subsequent amendments.
In order to prevent outgassing problems, do not use bare hands to handle
CAUTION!
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
Normal exposure to the environment cannot damage the TwisTorr 74 FS.
It is recommended that the pump be kept closed until the moment of installation
NOTE
on the system, in order to avoid possible contamination. Should the pump
remain unused for many months, Agilent advises that a complete powering
on/off cycle be carried out on the pump once a month.
TwisTorr 74 FS User Manual / 87-901-053-01 (A.00)
Instructions for Use

Preparation for installation

16
277/352